TBOR-shaped electro-optic modulator with dual output based on double-layer graphene

We proposed an electro-optic modulator with two-bus one-ring (TBOR) structure to improve the extinction ratio and reduce insert loss. It has a dual output compared with one-bus one-ring structure. In addition, double-layer graphene makes it possible for the modulation in the visible to mid-infrared wavelength range. It shows that this new electro-optic modulator can present two switching states well with low insertion loss, high absorption and high extinction ratio. At $\lambda =1550\text{ nm}$, when the switching states are based on the chemical potential, ${\mu }_{\mathrm{c}}=0.38\text{ eV}$ and ${\mu }_{\mathrm{c}}=0.4\text{ eV}$, the insertion losses of both output ports are less than 2 dB, the absorption of the output port coupled via a micro-ring reaches 45 dB and the extinction ratio reaches 14 dB. When the refractive index of the dielectric material is 4.2, the applied voltage will be less than 1.2 V, thus can be used in low-voltage CMOS technology.     

Facile preparation of Ag/Ag2WO4/g‐C3N4 ternary plasmonic photocatalyst and its visible‐light photocatalytic activity

Introducing plasmonic metals into semiconductor materials has been proven to be an attractive strategy for enhancing photocatalytic activity in the visible region. In this work, a novel and efficient Ag/Ag₂WO₄/g‐C₃N₄ (AACN) ternary plasmonic photocatalyst was successfully synthesized using a facile one‐step in situ hydrothermal method. The composition, structure, morphology and optical absorption properties of AACN were investigated using X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and UV–visible diffuse reflectance spectroscopy, respectively. Photocatalytic performance of AACN was evaluated via rhodamine B and tetracycline degradation. The results indicated that AACN had excellent photocatalytic performance for rhodamine B degradation with a rate constant of 0.0125 min^?1, which was higher than those of Ag₂WO₄ and Ag/Ag₂WO₄. Characterization and photocatalytic tests showed that the strong coupling effect between the Ag/Ag₂WO₄ nanoparticles and the exfoliated ultrathin g‐C₃N₄ nanosheets was superior for visible‐light responsivity and reduced the recombination rate of photogenerated electrons and holes. A proposed mechanism is also discussed according to the band energy structure and the experimental results.     

Internal plasticization of poly(vinyl) chloride using glutamic acid as a branched linker to incorporate four plasticizers per anchor point

Internal plasticization of polyvinyl chloride (PVC) using thermal azide‐alkyne Huisgen dipolar cycloaddition between azidized PVC and electron‐poor acetylenediamides incorporating a branched glutamic acid linker resulted in incorporation of four plasticizing moieties per attachment point on the polymer chain. A systematic study incorporating either alkyl or polyethylene glycol esters provided materials with varying degrees of plasticization, with depressed T_g values ranging from ?1 °C to 62 °C. Three interesting trends were observed. First, T_g values of PVC bearing various internal plasticizers were shown to decrease with increasing chain length of the plasticizing ester. Second, branched internal plasticizers bearing triethylene glycol chains had lower T_g values compared to those with similar length long‐chain alkyl groups. Finally, thermogravimetric analysis of these internally plasticized PVC samples revealed that these branched internal plasticizers bearing alkyl chains are more thermally stable than similarity branched plasticizers bearing triethylene glycol units. These internal tetra‐plasticizers were synthesized and attached to PVC‐azide in three simple synthetic steps. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1821–1835     

Two-step Estimation for Longitudinal Data When the Working Correlation Matrix is a Linear Combination of Some Known Matrices

Acta Mathematicae Applicatae Sinica, English Series - The generalized estimating equations(GEE) approach is perhaps one of the most widely used methods for longitudinal data analysis. While the GEE...     

An Inexact Modified Newton Method for Viscc and Application in Grasping Force

Acta Mathematicae Applicatae Sinica, English Series - For the variational inequality with symmetric cone constraints problem, we consider using the inexact modified Newton method to efficiently...     

The double deflating technique for irreducible singular M-matrix algebraic Riccati equations in the critical case

As is known, Alternating-Directional Doubling Algorithm (ADDA) is quadratically convergent for computing the minimal nonnegative solution of an irreducible singular M-matrix algebraic Riccati equation (MARE) in the noncritical case or a nonsingular MARE, but ADDA is only linearly convergent in the critical case. The drawback can be overcome by deflating techniques for an irreducible singular MARE so that the speed of quadratic convergence is still preserved in the critical case and accelerated in the noncritical case. In this paper, we proposed an improved deflating technique to accelerate further the convergence speed – the double deflating technique for an irreducible singular MARE in the critical case. We proved that ADDA is quadratically convergent instead of linearly when it is applied to the deflated algebraic Riccati equation (ARE) obtained by a double deflating technique. We also showed that the double deflating technique is better than the deflating technique from the perspective of dimension of the deflated ARE. Numerical experiments are provided to illustrate that our double deflating technique is effective.     

Precise Synthesis of Poly(thioester)s with Diverse Structures by Copolymerization of Cyclic Thioanhydrides and Episulfides Mediated by Organic Ammonium Salts

The precise synthesis of poly(thioester)s with diverse structures is still a significant challenge in the polymeric materials field. Herein, we report a novel approach to the synthesis of well‐defined poly(thioester)s by the controlled alternating copolymerization of cyclic thioanhydrides and episulfides induced by simple organic ammonium salts. Both the cation and anion have strong effects on the copolymerization. [PPN]OAc ([PPN]=bis(triphenylphosphine)iminium) with a bulky cation was proven to be efficient in initiating this polymerization, yielding poly(thioester)s with a completely alternating structure, controlled molecular weight, and narrow polydispersity. The poly(thioester) obtained from succinic thioanhydride and propylene sulfide is a typical semicrystalline material, possessing a high refractive index of up to 1.78. Because it uses readily available monomers, this method is expected to open up a new route to poly(thioester)s with diverse structures and properties.